CBPLL - L-13532 DEVELOPMENTAL MATERIAL
- MSDS: CBPLL
- Manufacturer: 3M GENERAL OFFICES
- Product Name: L-13532 DEVELOPMENTAL MATERIAL
- National Stock Number: 6850-00N071789
Product Identification
Product ID:L-13532 DEVELOPMENTAL MATERIAL
MSDS Date:01/23/1996
FSC:6850
NIIN:00N071789
MSDS Number: CBPLL
Responsible Party
ST PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: 612-733-1110
Cage: 1BY21
Contractor
Telephone: 612-737-4114
Cage: 1BY21
Ingredients
PERFLUORO COMPOUNDS; ((PERFLUORO-N-BUTYL)METHYL ETHER)
CAS: 163702-07-6
Fraction By Weight: 20-80%
OSHA PEL N/K
ACGIH TLV: N/K
PERFLUORO COMPOUNDS; ((PERFLUOROISOBUTYL)METHYL ETHER)
CAS: 163702-08-7
Fraction By Weight: 20-80%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES/SKIN: CONTACT DURING
PRODUCT USE IS NOT EXPECTED TO RESULT IN SIGNIFICANT IRRITATION.
INHALATION: PRACTICALLY NON-TOXIC BY INHALATION. INGESTION:
INGESTION IS NOT A LIKELY ROUTE OF EXPOSUR E TO THIS PRODUCT.
SWALLOWING A RELATIVELY LARGE AMOUNT OF THIS MATERIAL IS UNLIKELY
TO PRODUCE SERIOUS ILLNESS/DEATH.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION. SKIN: FLUSH WITH
LARGE AMOUNTS OF WATER. IF IRRITATION PERSISTS, GET MEDICAL
ATTENTION. IN HALATION: IF SIGNS/SYMPTOMS OCCUR, REMOVE PERSON TO
FRESH AIR. IF SIGNS/SYMPTOMS CONTINUE, CALL MD. INGESTION: DRINK
TWO GLASSES OF WATER. CALL MD.
Fire Fighting
Flash Point Method:CC
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:USE WATER, CARBON DIOXIDE, DRY CHEMICAL, DRY
POWDER.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:OBSERVE PRECAUTIONS FROM OTHER SECTIONS.
CONTAIN SPILL. COVER W/ABSORBENT MATL. COLLECT SPILLED MATL. CLEAN
UP RESIDUE W/APPROP ORGANIC SOLV. READ & FOLLOW SAFETY PRECAUTIONS
ON SOLV LABEL & MSDS. PLA CE IN APPROPRIATE METAL CONTAINER.
SEALCONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT EAT, DRINK OR SMOKE WHEN USING
THIS PRODUCT. STORE AWAY FROM HEAT. KEEP CONTAINER CLOSED WHEN NOT
IN USE.
Other Precautions:NO SMOKING WHILE HANDLING THIS MATERIAL. AVOID SKIN
CONTACT. AVOID EYE CONTACT.
Exposure Controls
Respiratory Protection:AVOID BRTHG OF VAPS, MISTS/SPRAY. AVOID BRTHG OF
AIRBORNE MATL. SELECT ONE OF THE FOLLOWING NIOSH APPRVD RESPS BASED
ON AIRBORNE CONC OF CONTAMINANTS & I/A/W OSHA REGS: HALF-MASK ORG
VAP RESP W/DUST/M IST PREFILTER, FULL-FACE ORG (SUP DAT)
Ventilation:USE W/APPROP LOCAL EXHAUST VENT. USE IN WELL-VENTILATED
AREA. IF EXHAUST VENT IS NOT ADEQUATE, USE APPROP RESP PROT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH EXPOSED AREAS THOROUGHLY WITH SOAP AND
WATER.
Supplemental Safety and Health
RESP PROT: VAP RESP W/DUST/MIST PREFILTER.
Chemical Properties
Boiling Pt:B.P. Text:140F,60C
Melt/Freeze Pt:M.P/F.P Text:-211F,-135C
Vapor Pres:170
Vapor Density:8.6
Spec Gravity:1.5
Solubility in Water:<20 PPM
Appearance and Odor:CLEAR, COLORLESS LIQUID, WITH SLIGHT ETHEREAL ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASES.
Stability Condition to Avoid:AS A GENERAL PRECAUTION, AVOID EXPOSURE TO
TEMPERATURES ABOVE THE BOILING POINT.
Hazardous Decomposition Products:CARBON MONOXIDE, & CARBON DIOXIDE,
HYDROGEN FLUORIDE. TOX VAPS, GASES,/PARTICULATES MAY BE PRODUCTS OF
THERMAL DECOMP.
Disposal
Waste Disposal Methods:RECLAIM IF FEASIBLE. INCIN IN INDUS/COMMERCIAL
FACILITY IN PRESENCE OF A COMBUST MATL. COMBUST PRODS WILL INCLUDE
HF. SINCE REGS VARY, CONSULT APPLIC REGS/AUTH BEFORE DISPOSAL. DISP
OF I/A/W LOC, STAT E & FED REGS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.